您现在的位置:首页 > 读方案 > [原创] PowerInt SID1183K单路IGBT和MOSFET驱动方案

[原创] PowerInt SID1183K单路IGBT和MOSFET驱动方案

关键词:电源管理,IGBT,MOSFET, SID1183K

来源:中电网    2017-12-27

PowerInt公司的SID1183K是eSOP封装的单路IGBT和MOSFET驱动器,采用创新的固态隔离器FluxLink技术的电隔离.峰值输出驱动电流8A,其它特性包括具有先进软关断(ASSD)的短路保护(DESAT),欠压锁住(UVLO),适合于1700V IGBT和MOSFET开关,开关频率高达75kHz,传输时延260ns,传输时延抖动±5 ns,工作温度-40℃ 到125℃,主要用在通用和伺服驱动,UPS,太阳能,焊接逆变器和电源.本位介绍了SID1183K产品亮点,框图和应用电路,以及采用SCALE™- iDriver SID1183K的通用基板参考设计主要特性,电路图,材料清单和PCB设计图.

The SID1183K is a single channel IGBT and MOSFET driver in an eSOP package. Galvanic isolation is provided by Power Integrations’ innovative solid insulator FluxLink technology. The up to 8 A peak output drive current enables the product to drive devices up to 600 A without requiring any additional active components. For gate drive requirements that exceed the stand-alone capability of the SID1183K, an external booster may be added. Stable positive and negative voltages for gate control are provided by one unipolar isolated voltage source.

Additional features are short-circuit protection (DESAT) with Advanced Soft Shut Down (ASSD), undervoltage lock-out (UVLO) for primary-side and secondary-side and rail-to-rail output with temperature and process compensated output impedance guarantee safe operation even in harsh conditions.

Controller (PWM and fault) signals are compatible with 5 V CMOS logic, which may also be adjusted to 15 V levels by using external resistor divider.

SID1183K产品亮点:

Highly Integrated, Compact Footprint
Split outputs providing up to 8 A peak drive current
Integrated FluxLink™ technology providing galvanic isolation between primary-side and secondary-side
Rail-to-rail stabilized output voltage
Unipolar supply voltage for secondary-side
Suitable for 1700 V IGBT and MOSFET switches
Up to 75 kHz switching frequency
Low propagation delay time 260 ns
Propagation delay jitter ±5 ns
-40℃ to 125℃ operating ambient temperature
High common-mode transient immunity
eSOP package with 9.5 mm creepage and clearance distances
Advanced Protection / Safety Features
Undervoltage lock-out protection for primary and secondary-side (UVLO) and fault feedback
Short-circuit protection using VCE SAT monitoring and fault feedback
Advanced Soft Shut Down (ASSD)
Full Safety and Regulatory Compliance
100% production partial discharge test
100% production HIPOT compliance testing at 6 kV RMS 1 s
Basic insulation meets VDE 0884-10
Green Package
Halogen free and RoHS compliant

SID1183K应用:

General purpose and servo drives
UPS, solar, welding inverters and power supplies

图1.SID1183K框图

图2.SID1183K应用电路图(1)

图3.SID1183K应用电路图(2):

图4.SID1183K应用电路图(3)

采用SCALE™- iDriver SID1183K的通用基板参考设计

This application proposal provides a circuit design for a general purpose base board for driving various IGBTpower modules.
The main features of the design are:
Suitable for IGBT power modules in various housings such as 17 mm dual, 17 mm six-pack,62 mm, PrimePACK™, etc. with a maximum blocking voltage of 1700 V 
Short-circuit detection with Advanced Soft Shut Down (ASSD) 
Electrical command inputs and status outputs 
0 V / 5 V command input logic 
0 V / 5 V status output logic 
Minimum pulse suppression 
Interlock of command inputs 
5 V supply voltage 
Single PCB solution with soldered-in gate driver IC

通用基板参考设计主要特性:

Suitable for IGBT power modules in various housings 
Up to 1200 V DC-link voltage 
Electrical interfaces 
Basic Active Clamping 
Short-circuit detection with Advanced Soft Shut Down

图5.通用基板参考设计外形图

图6.通用基板参考设计电路图
通用基板参考设计材料清单:



图7.通用基板参考设计PCB设计图(1):顶层

图8.通用基板参考设计PCB设计图(2):装配图

图9.通用基板参考设计PCB设计图(3):元件布局
详情请见:
https://gate-driver.power.com/sites/default/files/product-docs/1700v_scale-idriver_family_datasheet.pdf
https://gate-driver.power.com/sites/default/files/rdhp_1702.pdf
1700v_scale-idriver_family_datasheet.pdf
rdhp_1702.pdf
RDHP-1702 Design Data.zip

我来说两句