您现在的位置:首页 > 产品万花筒 > 立方直流有刷力矩电机

立方直流有刷力矩电机

关键词:电机控制,电机控制驱动器

来源:互联网    2015-09-28

原文:英文

Our family of miniature permanent magnet cube torque DC motors contains motors available in .75 and 1 inch frame sizes. These motors are designed to accommodate a wide range of applications including direct drive servo systems, recorder drives, holding torque and high torque-low speed control systems. It is a rapid response motor at all operating speeds because of its high torque-to-inertia ratio and low self-inductance. Torque increases directly with input current for linearity. As a direct servo drive, it offers high resolution. Its cubical shape allows for weight and space savings and ease in mounting.


Cube motors are often used in applications where high torque is required, but the available space is limited. Cube motors lend themselves to easier mounting than cylindrical motors in many applications and are easier to lock into an envelope.


Moog offers a choice of Alnico or Samarium Cobalt magnet materials to satisfy most any requirement. These rare earth magnets produce a higher magnetic energy per unit volume than most commercially available permanent magnets. Alnico magnets provide enhanced temperature stability while Samarium Cobalt magnets offer high energy with good, stable performance.


We’re tooled for hundreds of designs with different windings, end caps and other options including gearheads, brakes, resolvers, encoders and potentiometers. Most designs can easily be adapted to meet different requirements. We can also provide custom engineering services.


Features


4 pole 13 bar motors – 2 brushes standard and 4 brushes available
Stainless steel shafts for durable, rugged wear
Meets MIL-SPEC 810
Standard nickel plated housing resists corrosion in harsh environments
Peak torques from 1.0 to 20 oz-in
Optional gearheads, brakes, resolvers, encoders and potentiometers available
Available in .75 and 1 inch frame sizes:
Model 21 – 1 x 1 x 1 inches
Model 22 – 1 x 1 x .75 inches
Model 23 – 1 x 1 x 1.35 inches
Model 24 – 75 x .75 x .75 inches
Silver alloy brushes
Speeds up to (7500) rpm
Variety of windings available
Gold plated terminals
Gold alloy commutator
Shaft can be modified with front and rear extensions, integrated gear or a pinion


Benefits


High torque-to-inertia ratio in a small package
Rapid response at all speeds
Cartridge brush is easily field-replaceable
Skewed rotors provide minimum cogging torque
Gold-clad commutator for long life
Rare earth magnets provide higher performance than standard permanent magnets
Cubical shape provides weight and space savings and easy mounting
Torque increases directly with input current for high linearity as a direct servo drive
Low self inductance
自动翻译仅供参考

立方直流有刷力矩电机

我们的微型永磁立方体扭矩直流电机系列包含.75和1英寸的外形尺寸提供电机。这些电机的设计,以适应范围广泛的应用,包括直接驱动伺服系统中,记录器的驱动器,保持转矩和高转矩低速控制系统。它是在由于其高扭矩到惯性比和低的自感所有运行速度快速响应马达。转矩增加直接与输入电流的线性度。作为直接伺服驱动器,它提供了高解析度。其立方体形状允许重量和节省空间,并易于安装。


立方体电机通常在应用中使用,其中的高转矩是必需的,但可用的空间有限。立方体马达借给自己容易安装比圆筒电机在许多应用中,更容易锁入一个信封。


穆格提供铝镍钴和钐钴永磁材料的选择,以满足大多数的任何要求。这些稀土磁体产生每单位体积的高磁能比大多数市售的永磁体。铝镍钴磁铁提供了增强的温度稳定性,而钐钴磁铁提供高能量带好,性能稳定。


我们极好的装备了几百种图案不同的绕组,端盖等多种选择,包括齿轮箱,制动器,旋转变压器,编码器和电位器。大多数设计可以很容易地调整,以满足不同的要求。我们还可以提供定制工程服务。


特征


4杆13杆的电机 - 2刷子标准和4刷可用
不锈钢轴的坚固耐用,坚固耐磨
符合MIL-SPEC 810
标准镀镍外壳耐腐蚀的恶劣环境
高峰扭矩从1.0至20盎司英寸
可选的齿轮箱,制动器,旋转变压器,编码器和可用电位
可用.75和1英寸外形尺寸:
型号21 - 1×1×1英寸
型号22 - 1×1×0.75英寸
型号23 - 1×1×1.35英寸
型号24 - 75×0.75 x0.75英寸
银合金刷
速度高达(7500)转
各种可用的绕组
镀金端子
金合金换向器

轴可与前部和后部延伸,集成齿轮或小齿轮被修改


优点


高扭矩对惯性比在一个小包装
在所有的速度快速反应
墨盒刷是很容易现场更换
偏斜转子提供最低齿槽转矩
镀金转接器,使用寿命长
稀土磁体提供的性能比标准的永磁体高
立方形提供了重量和节省空间,易于安装
直接转矩随输入电流的高线性度作为直接伺服驱动
低自感

我来说两句